Site Navigation

Your Account

Choose Language


Make sure you follow the proper removal and installation instructions that fit your application any time your Fleet-Air Filter is services. Failure to do so could result in a poor seal, and cause damage to the engine.


No tools required.


Remove air filter housing cover
  • Remove air filter housing cover

  • Remove filter from housing

Add Comment

  • Make sure housing and housing nipple is clean before installing your Fleet-Air Filter.

Add Comment

  • Remove your Fleet-Air Filter from the box and any packaging.

  • Your new filter is pre-oiled and ready for installation.

  • If you just cleaned your Fleet-Air filter you must oil it before going further.

Add Comment

  • Apply a small amount of vaseline to the inside of the rubber seal for ease of installing.

  • Slide your Fleet-air filter onto housing nipple

  • Make sure your Fleet-Air Filter has a proper seal and not loose fitting.

Add Comment

  • Reinstall air filter housing cover

Add Comment


Congratulations you are done. Now start up your truck and get back to work.

8 other people completed this guide.


Member since: 11/02/2011

8,876 Reputation

19 Guides authored


Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 4

All Time: 2,309