Skip to main content

Site Navigation

Your Account

Choose Language

Introduction

Make sure you follow the proper removal and installation instructions that fit your application any time your Fleet-Air Filter is services. Failure to do so could result in a poor seal, and cause damage to the engine.

Tools

No tools specified.

Parts

  1. Remove air filter housing cover
    • Remove air filter housing cover

    • Remove filter from housing

    • Make sure housing and housing nipple is clean before installing your Fleet-Air Filter.

    • Remove your Fleet-Air Filter from the box and any packaging.

    • Your new filter is pre-oiled and ready for installation.

    • If you just cleaned your Fleet-Air filter you must oil it before going further.

    • Apply a small amount of vaseline to the inside of the rubber seal for ease of installing.

    • Slide your Fleet-air filter onto housing nipple

    • Make sure your Fleet-Air Filter has a proper seal and not loose fitting.

    • Reinstall air filter housing cover

Conclusion

Congratulations you are done. Now start up your truck and get back to work.

8 other people completed this guide.

Aaron

Member since: 11/02/2011

9,819 Reputation

19 Guides authored

2 Comments

What is the procedure for re-oiling the filters? Thanks.

John - Reply

Checkout this video from Pittsburgh Power. https://www.youtube.com/watch?v=xK15h-c6...

Aaron - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 2,344