Site Navigation

Your Account

Choose Language

LED Headlights Low Beam & High-beam come on at same time

I installed 2 new LED Low Beam headlights on my 09 KW 900L and now the High Beams come on in the dim position and the High Beam indicator flashes on and off ,until I turn on the high beams,,,which work ok ???

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

4 Answers

try using dieelectirc grease in the head light plugs it keeps the mosieture out .

i do this all the time on my 2002 pete .

dont forget to reset the fuse .

Was this answer helpful?

Score 0

Comments:

I did the dielectric grease when I Installed the lights, I talked to KW and they figure the bulbs are not drawing enough amps , I need to get a diode and resistor installed in the system to fool it into thinking there is more power draw. Thanks for your response

by

Add a comment

truck lite sells an adapter for the led lights which is needed on newer jeeps to get rid of the low draw problems. should work for you too.

Was this answer helpful?

Score 0

Comments:

Ok thanks ,will check it out ,

by

Thanks Guys ,, I added a resistor to one of the lights and they work great now except when it snows , not enough heat to melt the snow & ice off ,,, turns very black out

by

Add a comment

Check the red and green wires might have too switch the that's what I had too do

Was this answer helpful?

Score 0
Add a comment

What size rectifier diode did you use 5amp on the red wire ?

Was this answer helpful?

Score 0
Add a comment

Add your answer

Terrance will be eternally grateful.
View Statistics:

Past 24 Hours: 1

Past 7 Days: 7

Past 30 Days: 26

All Time: 1,855